AUTOMATIC TAPE LOG CUTTER
MODEL ATAC (MK-2)

Dimensional Fitting and Precise
Cutting in Efficient Automation
with servo mechanism and standard programmed cutting.

 This ATAC dose fitting the dimensions (it is alright even if all the different sizes) and cutting in a complete automation by the newest mechatronics technology resulting in a drastically decrease of work-load, improvement of work efficiency and cutting accuracy.

 We believe firmly that this machine contribute to your productivity and man hour saving very much.


FEATURES

1. Digital setting
The numeric key pad allows easy input of dimensional data for Program of tape logs cutting.
Once input, the work can be cut in any pattern as programmed (programmed cutting).

2. Pattern memory
Dimensional data of up to six cutting patterns can be stored.
These data can be called and used for cutting when necessary.
This feature is convenient for cutting a tape log in two or more different cutting patterns alternately.

3. Automatic correction of cutting dimensions
Variable cutting pitch enables tape logs to be cut to a dimension provided by subtracting a predetermined value from the set dimension. (Variable at 0.01mm pitches)

4. Multi purpose
This machine is the best suited to cut double sided tape, label stock, adhesive tape and medical tape.

5. Inverter control of work revolution
The revolution of the work can be set arbitrarily with the inverter.
It can be changed depending on the log materials.
Adjustment of the penetration speed of the blade into the log and possibility to choose the blade entrance angle into the material.

6. Long life
The shaft surface made of plastics does not damage the disc cutter, and serves a long life.











BASIC SPECIFICATION

Tape log to be cut

Diameter of shaft
Working tolerance
Pattern memory
Max. number of cuts
Cutting pitch

Max cutting length
Dimensions
Wight
Power supply
Air supply
Accessories
: Diameter  200mmƒΣ
@Length  1400mm or shorter
: 3inches
: }0.2mm or less
: Up to 6patterns can be stored at a time.
: 14steps~99 (In case of all different dimensions)
: 0.1mm
@(Provided with a function of automatic correction of 0.01mm pitches)
: 1400mm
: W 2000, 2400~H 1200~D 700mm
: Approx. 350kg
: AC200V 3-phase, 50HZ or 60HZ, 2KVA
: 0.6Mpa or more
: Disc cutter, etc.




































FULLY AUTOMATIC PAPER CORE CUTTER
MODEL APACC (MK-2 2000)

Dimensional Fitting and Precise
Cutting in Efficient Automation
with servo mechanism and standard programmed cutting.

* Hi-tech machine whose debut the industry has been hoping for long time.
* Easy operation by touch panel
* High precision and labor saving
* Optimal as in-house machine


Features of APACC

1. Digital setting (easy input)
Input of dimensional data can be done easily from the ten-key.
A paper core can be cut in any pattern only by pushing the start button.
(Programmed cutting)
Data of 6 patterns can be stored at any time.

2. Automatic paper core feeder (unmanned operation)
This system is composed of the slanting plate and the hopper, and it feeds paper core automatically and enables continuous automatic cutting.
Drastic labor saving and operation of higher speed become possible. (Please see the back sheet.)

3. Easy change of paper core size (without changing the shaft)
Size change (change in paper core diameter) can be easily made by changing the circular blade support and raising / lowering the cylinder set.
There is no limit for inner and outer diameters.

4. Automatically-adjusted cutting (Fine adjusting mechanism)
A paper core can be cut in dimensions which are obtained by subtracting a fixed length from all the preset dimensions.
Fine adjustment can be easily done by entering data from the touch panel.
(Subtraction length 0`9.99mm by 0.01mm)

5. Long lifetime
Resin has been used to the circular blade support and therefore the circular blade does not have to be ground for long time.
This is economical.













SPECIFICATIONS

Paper-core dimensions
Length
Cutting time
Cutting accuracy
Pattern memory
Max. number of cuts
Cutting interval
Max cutting length
Dimensions
Wight
Power supply

Air supply
Accessories
Consumed parts
: Inner dia 1 to 6 inches  1`15mm thick
: Max 1650mm
: About 25seconds for 10cuts per 1200mm (6mm thick)
: }0.2mm or less
: Up to 6patterns can be stored at a time.
: 14 (In case of all different dimensions)
: 1mm or 0.1mm (Provided with a function of easy change-over)
: 1250mm or 1650mm
: W 2000, 2400~H 1100~D 700mm
: Approx. 260kg
: AC200V 3-phase, 50HZ or 60HZ, 1KVA
@AC100V 1-phase, 50HZ or 60HZ, 1KVA
: 0.6Mpa or more  5L/min.
: Paper core support, paper core stand and other.
: Circular blade, circular blade support, etc.



Automatic paper core feeder (optional)

This system feeds paper core automatically to APACC MK-2 2000 and enables unmanned continuous operation for long time.
It is composed of the hopper with chain conveyor and the slanting plate with paper core feeding cylinder.
By a cutting completion signal from automatic paper core cutter, paper core is fed and chucked one by one.
After completion of cutting, final trimmed end is automatically removed and then the operation is stopped.
The combination of automatic paper core cutter and slanting plate only is possible.

Paper core dime
Number of contained paper core

Feeding speed
Size
: 1`3inch dia.~1250, 1650(mm)
: 100pcs, for hopper
@30pcs, for slanting plate
: 10`40sec / pie. (Variable speed)
: 1400, 1700mm (W)~2400mm (D)~1300mm (H)
















AUTOMATIC PAPER CORE CUTTER
MODEL APACC (MK-10)

(Equipped with servo mechanism and standard programmed cutting)

* Hi-tech machine whose debut the industry has been hoping for long time.
* Easy operation by touch panel
* High precision and labor saving
* Optimal as in-house machine


Features of APACC

1. Digital setting (easy input)
Input of dimensional data can be done easily from the ten-key.
A paper core can be cut in any pattern only by pushing the start button.
(Programmed cutting)
Data of 6 patterns can be stored at any time.

2. Automatically-adjusted cutting (Fine adjusting mechanism)
A paper core can be cut in dimensions which are obtained by subtracting a fixed length from all the preset dimensions.
Fine adjustment can be easily done by entering data from the touch panel.
(Subtraction length 0`9.99mm by 0.01mm)

3. Sharp cut surface
Cut surface is neat with no burrs, because paper core is cut by touching metal blade to metal shaft.

4. Small and light
The whole machine is small and light. It has casters and can be moved freely.

5. Automatic chuck
Chucking of paper core is automatically done, and this saves labor.


SPECIFICATIONS

Paper-core dimensions
Length
Cutting time
Cutting accuracy
Pattern memory
Max. number of cuts
Cutting interval
Max cutting length
Dimensions
Wight
Power supply

Air supply
Accessories
Consumed parts
: Inner dia 3inches  5`15mm thick
: Max 1400mm, 1600mm
: About 25seconds for 10cuts per 1200mm (6mm thick)
: }0.2mm or less
: Up to 6patterns can be stored at a time.
: 14 kinds (In case of all different dimensions) 99pieces
: 1mm or 0.1mm (Provided with a function of easy change-over)
: 1400mm or 1600mm
: W 2200, 2400~H 1100~D 700mm
: Approx. 300kg
: AC200V 3-phase, 50HZ or 60HZ, 3KVA
@AC100V 1-phase, 50HZ or 60HZ, 1KVA
: 0.6Mpa or more  5L/min.
: Paper core support, paper core stand and other.
: Circular blade, etc.


Quotation/Manufacture Specification
for Automatic Papercore cutter (Model APACC)
Messers
@
Delivery Place
Address
Tel No.@@@@@@@@@@@@@@@@@@@Fax No.
Delivery time
@ Model No. MK-
Quantity@@@@@@1 unit
‚r‚‚…‚“‚‰‚†‚‰‚ƒ‚‚”‚‰‚‚Ž‚“
@ @ ‚h‚Ž‚Ž‚…‚’ ‚„‚‰‚.
O‚•‚”‚…‚’ ‚„‚‰‚.
‚s‚ˆ‚‰‚ƒ‚‹‚Ž‚…‚“‚“
Paper-core dimensions
(See Table right)
@@@@@@@@@@@@mm




mother core length
@@@@@@@@@@@@mm
1 @ @ @
2 @ @ @
3 @ @ @
4 @ @ @
5 @ @ @
6 @ @ @
7 @ @ @
8 @ @ @
9 @ @ @
10 @ @ @
Cutting time
Approx.@@@@secs.@for 10 cuts
(in case of 1200mm long paper-core)
Cutting accuracy@@@@}@@@@mm
Max. cutting length@@@@mm
Pattern memory
Without/With@@@99 paterns
Cutting pitch
1mm pitch for more than 5mm
shaft@@@@ƒΣ
Max. cut number
25 (In case of programmed cutting)
Dimensions
mm W~1200mm H~700mm D
Weight
kg
Motor
KW@@@p
Power supply
AC200V three-phase 50/60Hz 1KVA
AC100V single-phase 50/60Hz 0.5KVA
Air supply
More than 6kgf/c‡uG 1L/min
Dry air (Hose inner dia. 8mm)
Applicable regulation
JIS, JEC, JEM, our in-house standards
Coating color
Munsell value 5Y7/1 (Light beige)
Major portion-treated with triiron
tetraoxide (black coating)
Guarantee
1 year after the day of initial use (Cutting hours not guaranteed)
Machine installation
Excluded/Included
Your power supply and air supply should be obtained from the distance
of less than 5 meters.
You will provide us with an unloading unit.
Accessaries
Paper-core catcher@@@@ƒΣ@@@ƒΣ@@@ƒΣ 1 set of tools
Paper-core receptor, paper-core stand (20 pcs cores) and other
Without/With
Circular blade (1 pie.)@Instruction manual (1 copy)
Consumed items
Circular blade receptor@@@@ƒΣ@@@ƒΣ@@@ƒΣ@@@ƒΣ@4 pcs. each
Request for supply of sample paper-core
@@@@ƒΣ@@@ƒΣ@5 pcs. each @@total@@@pcs.
Others
@

LK